1·OBJECTIVE: To prepare Fluconazole adhesive gel.
前言：目的：开发氟康唑粘附凝胶。
2·Methods 1%yekang cockroach gel bait and 0.5% Permanone smoke fog were used for chemical control. Adhesive killing method was applied in density investigation.
方法采用1%晔康杀蟑胶饵和0.5%氯菊酯的烟雾剂，密度监测采用粘捕法。
3·Through(sintering) experiment, the adhesive effect of silicon gel in ceramic mould is verified.
通过烧结实验，验证了硅溶胶在陶瓷型中的粘结作用；
4·The adhesive layer may include a bonding agent, such as a polymer gel, having a residual extraction force of between about 50 grams and about 200 grams.
该粘合层可包括例如聚合物凝胶的结合剂，该结合剂具有在大约50克和大约200克之间的残留物拨出力。
5·The performances of three kinds of gels were compared by the experiments of viscosity, gel intensity, syneresis rate, adhesive power, gel freezing point as well as melting point and so on.
进行黏度、凝胶强度、凝胶水析率、凝胶黏着力、凝胶凝固点及熔点测定等试验，以对比几种凝胶的性能。
6·The modified starch adhesive has consistent quality of good viscosity, low gel temperature, good wet tack and water resistance.
改性后的玉米氧化淀粉胶粘剂粘接强度好、糊化温度低、粘度适当、抗水性好。
7·Silicon glue, silica gel and metal bonding agent, rubber adhesive, rubber treatment agent, silicone agents, all kinds of seal adhesive and difficult to stick adhesive materials, coupling age.
硅胶胶水、硅胶与金属粘接剂、橡胶粘接剂、橡胶处理剂、矽胶处理剂、各类密封粘接剂、难粘材料粘接剂、偶联剂、处理剂。
8·When the strip covering the adhesive backing is removed and the gel is applied to the skin, an evaporation process occurs that lowers the surface temperature of the skin.
当软凝胶背后的贴纸被揭掉并应用到皮肤上时，通过蒸发的原理和过程可以降低体表皮肤的温度。